C1PLL - WiMax 4G LTE WiFi Interference Filter
by Titanium Satellite
C1-PLL ® Phase Lock Loop LNBF - Titanium Satellite
Check out the recent review of the C1-PLL Wideband LNBF in Tele Audiovision magazine
The Titanium Satellite C1-PLL ® features the simplicity of voltage controlled polarity selection with exceptional performance and stability required for reliable reception of S2, high FEC and narrow bandwidth satellite transponders. The C1PLL model has low-band filtering to provide exceptional performance in the 3.7GHz - 4.2GHz range. In many regions, the low-band frequencies are not used for satellite and are instead licensed for terrestrial services such as WiMax, 4G LTE and wide area WiFi. These terrestrial services will severly interfere with satellite reception. In the C1PLL, 3.6GHz to 3.7GHz has a soft filter with 3dB signal attenuation, but the 3.4GHz to 3.6GHz range has a hard filter to eliminate this potential terrestrial interference. International customers wishing to receive satellite services below 3.6GHz should instead purchase the wideband versions such as the C1W-PLL or the C2W-PLL LNBFs.
This innovative single output model is developed using the latest PLL chipsets with a balance of gain, isolation, stability and amplification to produce a Phase Look Loop C-Band LNBF that outperforms all other C-Band LNBFs. All Titanium Satellite products are factory line tested multiple times to assure specification compliance and performance. In addition, all products are inspected by an independent third party service to insure complete manufacturing and performance compliance. Any product found not to meet our exacting "A" grade requirements is either reworked and certified to "A" grade performance or destroyed. Unlike competitors, there is no 2nd market for "B" grade Titanium products!
We have all heard the comment, "Looks Aren't Everything". This statement is so true! The C1-PLL with the heavy cast aluminum mass and thick wall housing sports a glossy snow white color protective finish. This attractive finish with offsetting cool grey and black hardware not only looks great, but it also reduces overheating when exposed to direct sunlight. The natural color aluminum cooling fins also assist in dissipating heat from the electronics and body mass resulting in a lower operating temperature with increased performance.
The craftsmanship, quality components and innovative design make the C1PLL superior to any C-band LNBF available on the market. The C1-PLL is provided with a secure fitting, Royal Blue color feedhorn cover, dielectric slab insert for circular C-band reception and mounting hardware. The included universal flat type three ring scalar is tapped for mounting on button hook, three and four leg prime focus dish designs. An optional Titanium CS1 conical type scalar with a universal 68mm clamp is available for offset design dish mounting. All Titanium hardware is secured with the provided Allen Head type screws and key tool.
Titanium Satellite also introduces to C-band LNBF production the waterproof, 3GHz, blue-insert, F-fitting coax connection. After noting the cheap coax connections used on several competitor C-band LNBFs which had clinch point damage after only a few insertions, we requested the manufacturer to source a component upgrade to a 3GHz fitting. Yes, the upgraded fitting costs 10 cents more, but why go cheap?
While a traditional corotor design with the mechanical polarity controller provides increased performance and fine-tuning adjustments for overcoming interference and optimizing reception, many hobbyists and satellite viewers do not wish to be bothered with the additional expense, complexity and control limitations of this traditional feedhorn design. The C1-PLL is a simple way to increase performance and signal reliability of your BUD (Big Ugly Dish) without breaking the bank! The low MSRP yields a solid investment in improving your C-band system performance.
LNBF Installation Guide
|Input Frequency Range||3.70 ~ 4.20GHz|
|Output Frequency Range||950 ~ 1450MHz|
|Noise Temperature||15K typical|
|LO Stability (over temp ex offset)||± 50Khz|
|LO Phase Noise @ 1Khz||-72dBc|
|LO Phase Noise @ 10Khz||-81dBc|
|LO Phase Noise @ 100Khz||-90dBc|
|Conversion Gain||65dB typical|
|Gain Variation||±1dB / 27 MHz|
|Crosstalk Isolation||20dB typical|
|Control Signals Ca [V/CR]||11.5 ～ 14.0V|
|Control Signals Cb [ H/CL]||16.0 ～ 20.0V|
|DC Voltage||11 ~ 20Vdc|
|Output VSWR||2.0 : 1|
|Temperature Range||-22 ~ +140°F / -40 ~ +60°C|
|Relative Humidity||0 ～100% condensing|
|Polarization Type (cast ±45° scale)||Linear (w/dielectric for circular)|
|Connection||F-Type / 3GHz / Female|
|Weight||10.1oz / 286g|
|Construction||Precision Cast Aluminum|
|Hardware||Stainless Steel Allen Head (w/tool)|
|Housing / Scalar Finish||Polyurethane Powder (chip resistant)|
|Color||Snow White / Natural Cooling Fin|
|Feedhorn Cover||RF Low-loss (blue color)|
|Dimensions (w/o scalar)||7⅝ (l) x 4⅜ (h) x 2¾ (w) in 185 (l) x 87 (h) x 68 (w) mm|
|Scalar Type *||Flat - Prime Focus, 3 Ring|
|F/D with included Flat Scalar||0.32 ～ .44+ (cast scale)|
|Mount Type with Flat Scalar||Single pole, Tripod or Quad legs|
|* Optional Conical Scalar Kit – SC1||Offset Type Dish with F/D .5 ～ .8|
Titanium Satellite is the developer of the world's first PLL LNBFs. Don't be fooled by imitations, clones and copycats with their inferior performance. These copied products may carry our registered trademark C1 PLL and C2 PLL model names, but they are not the original Titanium Satellite products and are not licensed or authorized by Titanium Satellite for production or distribution. C1-PLL and C2-PLL LNBFs not displaying the Titanium Satellite mark infringe on our intellectual development, registered trademarks and proprietary designs. If you have been fooled into buying a C-band PLL clone, please immediately contact us and we will let you know how easy it is to exchange it for a genuine Titanium Satellite PLL product.
† The C1-PLL ®, C2-PLL ®, C1WPLL and C2WPLL logos are trademarks of Titanium Satellite